These settings are only from our recommendation. They don’t mean the must do or have Below are some very simple steps for setting up Team group DRAM module for desired frequency on the Asus ROG Crosshair VI Hero, Bios 3008. Because the IMC characteristics of Ryzen are way different from Intel, we decided to write this article to provide you some suggestions of how to set AMD Ryzen system easily and properly. :D!Currently we just find out this way will make your Ryzen system and our products work together easier. https://www.teamgroupinc.com/en/products/t-force/gaming-memory/ Environment: Motherboard: ASUS ROG Crosshair VI Hero Bios 3008x64 CPU: Ryzen 5 1600X Storage: T-FORCE CARDEA 240GB DRAM: TEAM GROUP DARK PRO DDR4 3200mhz C14 OS: Microsoft Windows 10 Professional x64 RS3 Memtest windows pro 3 Example for how to set up our DRAM modules for DDR 3200 on the AMD Ryzen system. First, choose Manual (Please don’t use DOCP) Set BCLK frequency at 100 Choose 2133/2400/2666MHz as memory frequency divider Next, go back and adjust the BLCK frequency again. When you change the BCLK value, the memory frequency changes as well. Therefore, you can raise the BCLK value to reach desired DDR frequency. Set the primary timings. Last, adjust the CPU and DRAM voltage. We advise you to set it at 1.35V when using 3000mhz or higher frequency RAM, and 1.2V when using under 3000MHz RAM. After that, save BIOS and you are done for all! Hope this would help you. If you have other question, please feel free to ask!
With the help of some software tools, you can detect memory settings from Windows XP. These may include the CPU-Z, SiSoft Sandra and EVEREST. In addition, SiSoft Sandra and EVEREST are equipped with the efficiency verification solution to further validate whether or not the performance based on the SPD settings is achieved.