Team Group Inc. Team Group Inc.

S745-25

2TB, 1TB, 512GB, 256GB, 128GB, 64GB

Features
  • Equipped with 112-layer 3D NAND with I/O efficiency increased up to 50% (*compared to the 96-layer 3D NAND)
  • Built-in LDPC ECC for error correction
  • Supports S.M.A.R.T. Function (exclusive smart tool software developed by TEAMGROUP)
  • Global wear leveling technology
  • Supports NCQ
  • Supports ATA
  • Supports TRIM Commands
  • Bad Block Managements
Color
IntroductionSpecification
Durable Industrial-Grade 112-layer Flash Memory

Durable Industrial-Grade 112-layer Flash Memory

Equipped with the latest 3D NAND technologies which allow memory cells to be stacked up to 112 layers, a drastic increase in unit density from the former 96 layers. The additional layers help reduce read latency, increase storage efficiency, and enhance data protection.

Supports SLC Caching Technology & Drastically Increases Computing Efficiency

Supports SLC Caching Technology & Drastically Increases Computing Efficiency

Uses SLC direct to TLC technology to segment the SSD. Designated sections simulate SLC to deliver higher transmission speeds, which can help increase the SSD's read/write speeds.

Supports error correction codes (ECC) such as LDPC + TRIM commands + Global Wear Leveling technology + End-to-end data protection

Supports error correction codes (ECC) such as LDPC + TRIM commands + Global Wear Leveling technology + End-to-end data protection

1. Ensures accuracy of data transmissions and extends the service life of the internal flash memory.
2. Primarily applied to increase the efficiency of garbage collection in the industrial SSD to maintain peak performance and ensure a fast writing process.
3. Prioritize areas with low read/write cycles for writing to ensure that writing is evenly distributed across the device, thereby prolonging service life.
4. Ensures data integrity at every step. From when it enters the industrial SSD to until it leaves, each piece of data is protected to guarantee data integrity during each transmission.

Supports S.M.A.R.T. Function (exclusive smart tool software developed by TEAMGROUP) (Taiwan Invention Patent: I751753)

Supports S.M.A.R.T. Function (exclusive smart tool software developed by TEAMGROUP) (Taiwan Invention Patent: I751753)

S.M.A.R.T. is a smart tool software developed exclusively by TEAMGROUP that allows users to monitor the product's health and optimize performance accordingly. Its main function is to check disk info, system information, and read/write speed. With S.M.A.R.T., users can check up on the industrial SSD's operational status anytime they want.

 

 

Product Specifications

Model S745-25
Interface SATA III 6.0Gb/s
Flash Type 3D TLC
Capacity 64GB / 128GB / 256GB / 512GB / 1TB / 2TB[1]
Sequential R/W R/W: 550 / 505MB/s (Max.)[2]
Max. Power consumption 4.9V × 427 mA
Dimension 100 mm x 69.85 mm x 6.8 mm (3.94" x 2.75" x 0.27")
Shock
  • Operation: 50G/11ms (compliant with MIL-STD-202G Test condition A)
  • Non-operation: 1500G/0.5ms (compliant with MIL-STD-883K Test condition B)
Vibration
  • Operation: 7.69 Grms, 20~2000 Hz/random (compliant with MIL-STD-810G General)
  • Non-operation: 4.02 Grms, 15 ~ 2000 Hz/sine (compliant with MIL-STD-810G General)
MTBF > 3 million hours
Storage Temperature -55°C ~ +95°C
Operation Temperature Standard Temp.: 0°C (32°F) ~ 70°C (158°F)
P/E Cycle

3K

Thermal Sensor
External DRAM Buffer ×
TRIM
S.M.A.R.T.
Warranty 3-year limited warranty[3]
Precautions
[1] 1GB=1,000,000,000 Bytes. In OS system, it would be displayed as 1,000,000,000 Bytes/1024/1024/1024 = 0.93GB
[2] Transmission speed will vary according to different hardware/software conditions, therefore the data can only use for basic reference.
[3] The warranty period of solid-state drives (SSD) products is divided into a warranty of years and a warranty of the number of disk writes. One of the two conditions (the earlier one is the standard).Any improper action that causes the flash to exceed the lifespan limitation will not be warranted. (Erase Count MLC:3,000 times, SLC: 60,000 times, High Endurance 3D TLC(10K): 10,000 times,Industrial 3D TLC: 3,000 times ) The erase count judge standard is to use TEAMGROUP official released S.M.A.R.T. Tool.

NOTES:
  • We reserve the right to modify product specifications without prior notice.

Compare