Team Group Inc. Team Group Inc.

Q&A

Home Q&A

1. ASUS

(1) ASUS motherboard (AMD chipset/CPU)

a. Open XMP

i. Press “Delete” or “F2” to enter the BIOS. Then press F7 to enter “Advanced Mode”.

ii. Press right arrow key to “Ai Tweaker”(Blue frame) and choose “Ai Overclock Tuner”(Green frame). Turn “Auto” into “D.O.C.P”(Red frame).

1_ASUS_1_a_1

iii. Press F10 to save the changes and exit the BIOS after completing steps above.

 

b. Manual Overclocking Setting

i. Press Delete or F2 to enter BIOS. After entering the BIOS, press F7 to enter Advanced Mode.

ii. Press right arrow key to move to Ai Tweaker. Enter Memory Frequency to set the frequency you prefer.

1_ASUS_1_b_1

iii. After setting the frequency, go down to find DRAM Timing Control (red frame) and press “Enter”.

1_ASUS_1_b_2

iv. Find DRAM CAS# Latency and set the five values below in order(Red frame).

1_ASUS_1_b_3

v. Go back to the previous page after setting the CL value. Find DRAM Voltage and fill in the voltage you want.

1_ASUS_1_b_4
 

vi. Press F10 to save the changes and exit the BIOS after completing the steps above.

 

(2) ASUS motherboard (Intel chipset/CPU)

a. Open XMP

i. Press Delete or F2 to enter BIOS. Then press F7 to enter Advanced Mode.

1_ASUS_2_a_1

ii. Press right arrow key to move to Extreme Tweaker(Red frame). Then choose Ai Overclock Tuner(Green frame). Change into XMP(Blue frame) and press F10 to save the data and then leave.

1_ASUS_2_a_2
 

b. Manual Overclocking Setting

i. Press Delete or F2 to enter BIOS. Then press F7 to enter Advanced Mode.

ii. Press right arrow key to move to Extreme Tweaker and find the DRAM Frequency(Green frame) below. Choose the frequency you prefer(Blue frame) and press “Enter”.

1_ASUS_2_b_1

iii. Find the DRAM Timing Control(green frame) and press enter after setting the frequency.

1_ASUS_2_b_2

iv. Find the DRAM CAS Latency and set the 3 values in order below(Gree frame).

1_ASUS_2_b_3

v. Go back to the previous page and find DRAM Voltage(Green frame) after setting the CL value. Fill in the voltage in the DRAM Voltage.

Dram voltage
 

vi. Press F10 to save the changes and exit the BIOS after completing the steps above.

 

2. MSI

(1) MSI motherboard (AMD chipset/CPU)

a. Open XMP

i. Click “Delete” or “F2” to enter BIOS, and then click “F7” into advanced mode.

2_MSI_1_a_1

ii. There are 2 ways to open XMP

(i) Click “A-XMP”(green frame), choose “2”, click F10 to save and then you can leave the page.

2_MSI_1_a_2

(ii) Enter OC(green frame) on the left and switch “A-XMP” inside from “Disable” to “Profile2”(red frame), and click “F10” to save. Then you can leave the page.

2_MSI_1_a_3
2_MSI_1_a_4
 

b. Manual Overclocking Setting

i. Press "Delete" or "F2" to get into BIOS and press F7 to get into "Advanced Mode".

ii. Get into "DRAM Frequency"(green frame) and choose the frequency (red frame).

2_MSI_1_b_1

iii. After setting the frequency, click "Advanced DRAM Configuration" and fill in the CL value (green frame).

2_MSI_1_b_2
2_MSI_2_b_3

iv. After setting the CL value, get into DRAM Voltage(green frame), fill in the voltage(blue frame).

2_MSI_2_b_4

v. After doing the steps as above, press "F10" to save the settings.

 

(2) MSI motherboard (Intel chipset/CPU)

a. Open XMP

i. Press "Delete" or "F2" to get into BIOS and press F7 to get into "Advanced Mode".

2_MSI_2_a_1

ii. You have two choices to open XMP.

(i) Click the A-XMP(red frame) on the top, transfer to "ON" and press F10 to save the settings.

2_MSI_2_a_2

(ii) Get into OC(red frame), choose "Extreme Memory Profile (X.M.P)"(blue frame) and change from Disable to Enable. Then press F10 to save the settings.

2_MSI_2_a_3
 

b. Manual Overclocking Setting

i. Press "Delete" or "F2" to get into BIOS and press F7 to get into "Advanced Mode".

ii. Get into "DRAM Frequency"(red frame) and choose the frequency(red frame).

2_MSI_2_b_1

iii. After setting the frequency, choose "Advanced DRAM Configuration"(red frame).

2_MSI_2_b_2

iv. Fill in the CL value(green frame) in Advanced DRAM Configuration.

2_MSI_2_b_3

v. After setting the CL value, fill in the voltage(blue frame) in "DRAM Voltage"(green frame).

2_MSI_2_b_4

vi. After doing all the steps above, press "F10" to save the settings.

 

3. Gigabyte

(1) Gigabyte motherboard (AMD chipset/CPU)

a. Open XMP

i. Click “Delete” or “F2” to enter BIOS.

ii. Select M.I.T.(blue frame), select Advanced Memory settings(green frame) and then press “Enter”.

3_Gigabyte_1_a_1

iii. Select “Extreme Memory Profile(X.M.P.)”(red frame), press “Enter” to enter “Profile1”(blue frame). And then press “Enter” to check again.

3_Gigabyte_1_a_2

iv. Press “F10” to save and leave BIOS after finishing all the steps above.

 

b. Manual Overclocking Setting

i. Press “Delete” or “F2” to enter BIOS.

ii. Switch to “M.I.T.”(blue frame), choose Advanced Memory Settings(green frame) and press “Enter”.

3_Gigabyte_1_b_1

iii. Select System Memory Multiplier(green frame), set the frequency(blue frame). For instance, input 28.00 if you’d like to set the frequency to 2800Mhz. At the moment, Memory Frequency(red frame) will automatically change into relative frequency.

3_Gigabyte_1_b_2

iv. After finishing setting the frequency, find “Memory Timing Mode”(red frame) below and switch “Auto” into “Manual”(green frame).

3_Gigabyte_1_b_3

v. And then fill in 5 values in order starting from CAS Latency.

3_Gigabyte_1_b_4

vi. After finishing filling in CL Value, back to the last page “M.I.T.” to find “Advanced Voltage Settings”(green frame) and then press “Enter”.

3_Gigabyte_1_b_5

vii. Select DRAM Voltage(red frame) and then select Voltage(blue frame).

3_Gigabyte_1_b_6

viii. After finishing all the steps above, press “F10” to save and leave BIOS.

 

(2) Gigabyte motherboard (Intel chipset/CPU)

a. Open XMP

i. Press “Delete” or “F2” to enter BIOS

ii. Switch to “M.I.T.”(blue frame), select “Advanced Memory Settings”(green frame) and press “Enter”.

3_Gigabyte_2_a_1

iii. Find “Extreme Memory Profile(X.M.P.)”(red frame), press “Enter” to enter “Profile1”(blue frame), and then press “Enter” again.

3_Gigabyte_2_a_2

iv. After finishing all the steps above, you can press “F10” to save and leave BIOS.

 

b. Manual Overclocking Setting

i. Press “Delete” or “F2” to enter BIOS.

ii. Switch to “M.I.T.” on the above, select “Advanced Memory Settings” and press “Enter”.

iii. Select “System Memory Multiplier”(green frame), set the frequency(blue frame). For instance, input 28.00 if you’d like to set the frequency to 2800Mhz. At the moment, Memory Frequency(red frame) will automatically change into relative frequency.

3_Gigabyte_2_b_1

iv. After finishing setting the frequency, select “Channel A Memory Sub Timings”(green frame). (Condition: Follow this step if you plug 2 sticks in the way from Motherboard’s Manual. If you plug in 4 sticks, please select “Channel A & B”.)

3_Gigabyte_2_b_2

v. After entering “Channel Memory Sub Timings”, switch “Memory Timing Mode”(green frame) from “Auto” to “Advanced Manual”(blue frame).

3_Gigabyte_2_b_3

vi. And then fill in 4 values(green frame) in order starting from CAS Latency in “Channel A Standard Timing Control”(blue frame).

3_Gigabyte_2_b_4

vii. After finishing the setting of CL value, back to the last page “M.I.T.”, select “Advanced Voltage Settings”(green frame) and then press “Enter”.

3_Gigabyte_2_b_5

viii. After entering “Advanced Voltage Settings”, select “DRAM Voltage Control”(green frame)

3_Gigabyte_2_b_6

ix. Fill in the proper voltage(blue frame) in DRAM voltage.

3_Gigabyte_2_b_7

x. After finishing all the steps above, you can press “F10” to save and leave BIOS.

 

4. ASrock

(1) ASRock motherboard (AMD chipset/CPU)

a. Open XMP

i. Press Delete or F2 to enter the BIOS.

ii. Press F6 to enter Advanced Mode (red frame)

4_ASRock_1_a_1

iii. Press right arrow key to OC Tweaker(green frame) and find Load XMP Setting(Red frame). Enter to choose XMP 2.0 profile 1(blue frame).

4_ASRock_1_a_2

iv. Press F10 to save the changes and exit the BIOS after completing the steps above.

 

b. Manual Overclocking Setting

i. Press Delete or F2 to enter BIOS.

ii. After entering the BIOS, press F6 to enter Advanced Mode.

iii. Press right arrow key to move to OC Tweaker and find DRAM Frequency (red frame). Enter to choose a frequency you prefer.4_ASRock_1_b_1
 

iv. Find CAS# Latency in Primary Timing and set the five values below(red frame)

4_ASRock_1_b_2

v. Go back to the previous page after setting the CL value. Find DRAM Voltage and fill in the voltage.

4_ASRock_1_b_3

vi. Press F10 to save the changes and exit the BIOS after completing the steps above.

 

(2) ASRock motherboard (Intel chipset/CPU)

a. Open XMP

i. Press “Delete” or “F2” to enter BIOS.

ii. Press “F6” to enter “Advanced Mode”(red frame) after entering BIOS.

4_ASRock_2_a_1

iii. Press right arrow key to move to “OC Tweaker” (red frame). “Find DRAM Configuration”(blue frame) and press “Enter”.

4_ASRock_2_a_2

iv. Find “Load XMP Setting”(red frame). Press “Enter”, select “XMP 2.0 Profile 1” and press “Enter” again to confirm.

4_ASRock_2_a_3

v. Press “F10” to save the changes and exit the BIOS after completing the steps above.

 

b. Manual Overclocking Setting

i. Press “Delete” or “F2” to enter BIOS.

ii. Press “F6” to enter “Advanced Mode”(red frame).

4_ASRock_2_b_1

iii. Press right arrow key to move to “OC Tweaker”(red frame). Find “DRAM Configuration”(blue frame) and press “Enter”.

4_ASRock_2_b_2

iv. Find the DRAM Frequency below and choose the frequency you prefer(blue frame).

4_ASRock_2_b_3

v. Go to the “Primary Timing”(red frame) and find the CAS# Latency. Set the 4 values in order.

4_ASRock_2_b_4

vi. Go back to the previous page after setting the CL value. Choose Voltage Configuration (red frame) to enter.

4_ASRock_2_b_5

vii. Fill in the voltage in “DRAM Voltage”(red frame)

4_ASRock_2_b_6

viii. Press “F10” to save the changes and exit the BIOS after completing the steps above.

Compare

Compare Clear